Det-tronics Fire and Gas Detection Systems

EQP security systems can be flexibly configured with flame and gas detector detection, alarm information and warning, gaseous and predominant valve solutions.


In dangerous areas; The Eagle Quantum Premier (EQP) safety system is a system that can perform monitoring and protection functions of the extinguishing system and: fire and gas detection at the same time.

FUNCTIONAL

 

FM approved to ANSI/NFPA-72-2010 National Fire Alarm Code

Compliance to ANSI/ISA-12.12.01-2000 electrical equipment performance standard

Performance certified to FM 6310/6320 for gas detection

SIL 2 Capable certification

Performance approved to ATEX EN60079-29-1, and CSA 22.2 No. 154 for gas detection

EN54 compliant

USCG, Lloyd's Register type approval for offshore

Explosion-Proof for Class I Division 2 Groups A, B, C, D (T4) and Class I Zone 2

FLEXIBLE

 

Modbus TCP/IP Master/Slave; Modbus RTU Master/Slave, and Allen Bradley ControlNet™ communication capability

Emerson AMS Suite integration through S3

Compatible with Det-Tronics flame and gas products

Accommodates a variety of third-party devices with 4-20 mA or "dry contact" type inputs

Execute fire and gas alarm and suppression control

Programmable logic

246 or 16 node capacity

 

 

RELIABLE

 

Up to 246 addressable field devices and 32,500 feet (10,000 meters) of wiring on the network

Deluge/agent and pre-action release capability for fire suppression

Simplex or redundant operation

Extensive built in diagnostics

 

 

Safety System Software (S3)

 

An industrial facility says “Danger is coming!” with alarms. Proper and serious programming is required to transfer this to the operator. Otherwise, the risk you take will be higher than the investment you make. The S3 program offers a unique solution to achieve a sustainable competitive advantage and to facilitate today's programming processes. Here are a few of the advantages it provides.

 

It can perform the following functions via serial or ethernet port.

 

 

Configurations of field devices

User program

User logic creation (IEC61131-3)

User simulation and test support

Online logical monitoring

Drawing of the logic

Point display in the configuration

Modbus and Allen Bradley connection

Logic editor enhancements

 

 

S3 software is fully compatible with Det-Tronics products and third-party devices with the Eagle Quantum network. The S3 graphics program is highly suitable for gas detection, fire detection and fire extinguishing.

 

To ensure easy communication with existing systems, S3 distributed control systems can provide data safely with other OPC compatible devices. It is compatible with Emerson AMS Suite.

 Dokümanlar